City of Irving TX water heater requirements
July 30, 2008 at
2:57 pm | Category:
Irving TX
Effective September 2007, the Texas State Legislature enacted into the Plumbing License Law additional wording to specifically include water heaters in their list of plumbing fixtures, required by law, to have a plumbing permit issued prior to installation. In addition, the law provides that such installations be done according to current codes by a Irving TX licensed master plumber and inspected by a licensed plumbing inspector.
The City of Irving follows the 2006 International Codes.
A permit and inspection is required for a water heater installation. A drain pan is required on all water heater installations. If the water heater pan cannot be piped to the outside, a hose bib on the pan opening is required. This will enable the occupant to attach a hose and run it to the outside. If a temperature and pressure relief valve cannot be run to the outside a Wags valve or other approved similar technology is required.
Irving TX Building Inspection 972-721-2424
For more information on water heaters and water heater pricing in Irving TX please visit our website.
*This is for informational purposes only and there is no guarantee as to its accuracy, as each city updates codes without notification. Please contact your city for up to date information regarding your project.
If you are looking for a Plano area plumber please call us today at 972-509-0224 or complete our online request form. |
